USB to Ethernet Converter (not the other way around)?

Question

I have a printer with a USB connector that I wish to connect to my powerline adapter to allow wireless printing via my existing router (hope that makes sense). Does anyone know of a good USB to ethernet adapter. There are plenty of ethernet to USB connectors out there but I need it the other way around. I know about wireless print servers but I didn't want to go to the trouble/expense if there is a simple adapter available.

Many thanks.

Answer 1

You can get a regular USB/Ethernet print server for about $25 - connects your USB printer to the powerline adapter. It's not wireless, but it works.



The only cheaper way is what the earlier poster suggested- just attach the printer to one of the network computers via USB and share it. Of course with that approach the printer isn't available if the computer in question is turned off.

Answer 2

What in the international are you attempting to end? USB and Ethernet are 2 thoroughly diverse standards and are not properly suited in any way. you're extra in all probability to fry some thing than to make something that could artwork. while you're finding for a USB Ethernet adapter, they exist. the only different undertaking i will think of of which you would be attempting to do is build a sparkling documents cable for an APC UPS. they have USB on one end and RJ-40 5 on the different, whether it truly is not an Ethernet cable...it truly is a USB documents cable with an RJ-40 5 plug on the different end. plenty extra effectual off only determining to purchase one.

Answer 3

You can't just adapt the USB cable to ethernet. To use that printer it must either be connected to a computer or a print server of some kind. The print server gives the printer an IP address that makes it identifiable on a network. Simply connecting an ethernet cable to the printer won't make it usable unless it were a network capable printer (which simply have a print server built in).

Answer 4

you can connect your printer to a wireless adapter that will then connect to your network, all you do then is setup your printer and a small home network to print through the network, and dont no one knock this because it can be done if your clever enough.

Answer 5

what you are trying to do is not possible lolz



USB (Universal Serial Bus) is universal in real sense i.e almost all types of devices can be connected to USB using one or the other type of adapter or simulator. But the reverse is not true i.e. a USB device can not be connected to any other type of port or jack.

Answer 6

Only with special hardware, else plug it into an existing client PC and share it through 'network neighborhood' ...